To add background music: With your project open in the Project browser, click the “Music and Sound Effect” button in the toolbar below the viewer, or choose Window “Music and Sound Effects.” The Window menu appears in a light gray bar across the top of your computer screen. IMovie assumes that anything shorter than a minute is a sound effect, not a background song, which isn’t helpful if you want to start your movie with a short piece of music.
After you’ve arranged your audio clips in the timeline, you can fine-tune volume levels, fade the audio in or out, and even change the speed of your clips.
Audio waveforms are visual representations of the actual sound. You can show audio waveforms to adjust and compare volume levels between clips or to help align audio clips with your video.
Note: Because photos don’t contain audio, they don’t have waveforms.
With your project open, tap the Waveform button .
Waveforms change as you adjust clip volume and are colour-coded with yellow and red peaks, so you can see whether your audio is loud or distorted. In this example, the detached audio clip (in blue) contains some of these peaks.
Yellow indicates that the audio is just above the ideal volume range. Red indicates that the audio is too loud and potentially distorted; you should lower the clip’s volume until there is little to no red.
If you mute a clip, the waveform appears dimmed but is still visible.
With your project open, tap a clip in the timeline to reveal the inspector at the bottom of the screen.
Tap the Audio button .
Do any of the following:
Turn sound off or on for a clip: Tap the Mute button next to the volume slider. When the clip is muted, tap the Mute button again to turn sound on.
When you turn off the sound for a video clip, a mute icon also appears in the upper-left corner of the clip in the timeline.
Adjust volume: Drag the volume slider left or right.
To make sure that the sound in your video clips can be heard over the background music, iMovie applies audio “ducking” to background music. Ducking lowers the volume of background music clips whenever there’s a video clip whose sound is playing at the same time. When a video clip’s sound is off, ducking isn’t applied.
Tap outside the inspector to close it.
You can quickly add fade-ins and fade-outs to audio clips in the timeline using fade handles.
Fades appear as shaded areas in the clip to represent where the volume increases or decreases.
If you have a video clip with audio, you must first detach the audio as a separate clip in order to create fade-ins or fade-outs. See Arrange audio clips in iMovie on iPad.
With your project open, tap an audio clip in the timeline to reveal the inspector at the bottom of the screen.
Tap the Audio button .
Tap Fade to reveal fade handles at the beginning and end of your clip.
Drag the fade handles to set the duration of the fade-in and fade-out.
You can adjust the speed of audio clips in iMovie. You can even fine-tune speed adjustments for a single clip by dividing it into ranges, each with its own speed. For example, you could set multiple ranges so that a clip slows down, speeds up and then slows down again.
Note: You can’t adjust the speed of a soundtrack or theme music track added from the Soundtracks menu. See Add a soundtrack or theme music.
With your project open, tap an audio clip in the timeline to reveal the inspector at the bottom of the screen.
Tap the Speed button . Imovie 12 tutorial.
A yellow bar appears on the clip, with range handles at each end.
To create ranges within a clip, do one of the following:
Drag either yellow range handle.
Tap Add in the inspector to create another range.
In the inspector, drag the slider right to increase the speed, or left to decrease it.
As you drag, the relative speed is displayed below the clip (2x means twice the normal speed, 1/2x means half the normal speed and so on).
If you want to create additional ranges, tap the portion of the clip outside the currently selected range, or tap Add in the inspector to create a range border at the playhead position.
Drag the yellow range handles to adjust the range, then adjust the range’s speed using the slider. https://ameblo.jp/corlisdihina/entry-12651137545.html.
Each range you create is indicated by a solid white line in the clip.
To reset your adjustments, tap Reset in the inspector.
When you’ve finished, tap anywhere outside the inspector to dismiss it.
By default, iMovie preserves the pitch of audio clips that are sped up or slowed down. To change this, tap the Project Settings button , then tap to turn on “Speed changes pitch”. This allows a recorded voice to be higher when sped up or lower when slowed down.
People are consuming increasingly large amounts of video content these days, and with the accessibility of easy-to-use video editing programs like the iMovie app bundled with your Mac, making your own movie has never been easier. If you haven’t tried it yet, here are some quick guides on how to use iMovie on Mac so that you can make the most of its features. Elder scrolls skyrim mac os x.
Please note that the navigation menu may vary depending on the version of your Mac’s OS.
Table of Contents
To start a movie project using iMovie on Mac,
If the files that you want to use are not in any of the listed options, you may also import files from your iPhone, iPod, iTouch or digital camera.
To do this,
Once the files that you want to use have been prepared, you may start creating a new project on iMovie.
To create a new movie project on iMovie,
To add a clip from a single file,
To add clips from different files,
If you feel like a clip is too long and contains unnecessary scenes (or perhaps embarrassing ones that you’d rather not show), you can cut certain sections from the final output.
To do this, just click on the edge of the clip that you wish to edit and drag the slider across the parts that you wish to include — stopping right before the parts that you want to be discarded — do a left click with your mouse, and you’re done. Ifinance 4 4 – comprehensively manage your personal finances.
While working with a clip from a single file, you may feel the need to split it — perhaps to add some text or a dramatic pause.
To do this, just place the cursor on the part of the clip where you want the split to take effect, then hold the “Command” key while pressing “B.” Alternatively, you can also do a right click, then select “Split Clip” from the list of options.
The original clip will now become two separate clips.
To make a movie, sometimes you have to combine different clips. To do this, just highlight the clips that you want to use for your movie, then drag them to your project timeline. Your timeline will display separate film strips representing each clip.
After that, you will have the option to add transitions and effects between each clip or leave them as they are. The clips will then be played as one, continuous movie.
When making a movie using clips featuring different scenes, you would want to make the shift from one scene to another to be as seamless as possible. Adding transitions between clips can help you do this.
To add transitions between clips,
If you will be making a lot of video presentations or tutorials, a helpful iMovie feature that you need to be acquainted with is adding titles or subtitles to your clips.
To do this,
Background music plays a lot of important roles in a movie. It can set the mood, introduce transitions, build up climax, or define a character. If you want to add a background theme to your own movie project, you can do it by,
The same process also works if you want to add an audio narration to your video clip instead of background music.
Now that you already know how to use iMovie to add background music to your project, how about if you want to add a background image this time?
You can also do this.
If you’re already happy with the current state of your movie project, make sure you save it so you don’t lose any of the changes you’ve made.
To save your movie project,
Or if you’re using a different version of iMovie,
Doing this will save your finished movie project on your computer for later sharing. If your project is not finished yet, but you want to save your progress so far, you can do it by,
After you’re done with your movie project, you may want to share it with other people.
To do this,
If the website where you want to upload your movie to is not in the options, follow Steps 1 and 2, then click on “File” instead. This will save the movie project on your Mac, then you can just upload it manually to the website where you want to publish it later.
And those are some of the most basic things that you can do when using iMovie to create a movie project on Mac. There are more advanced features and effects that you can use to improve your movie project even more, but we’ll save that for another day.
For now, try to give it a spin and have fun creating your first movie project.
0 
Star